Call
Fibreglass pool with paved surround at dusk
Pool Range

Fibreglass Pool Designs

Round, lap, rectangular, deep or shallow — browse the whole range by shape, size, depth and colour. Every design links to a real model with a live installed price.

40 models
Round, lap & rectangular
From $46,053 installed

A fibreglass pool design is really two decisions at once: the shape and size of the moulded shell, and the style you build around it. Because our shells come out of a fixed mould, the shape options are defined and finite — a compact round plunge, a long lap corridor, a family rectangle, or a deep entertainer — and every one of them is a model you can price today.

Below is the same 40-model range, grouped by shape, size, depth and colour. Pick the design that matters most to you and jump straight to the pools that fit. Prices are live all-inclusive installed figures for standard South East Queensland site conditions.

By shape · Round

Round & circular pools

Our round pools are the one true departure from the rectangle in fibreglass, and we build three of them. The Terrace 3 is a 3m circle with a flat, uniform floor at 1.45m — no ledge, no deep end. The Infinity 3 and Infinity 4 (3m and 4m) add a bench seat set into the rim, so you can sit in the water around the edge.

A circle earns its place on a small or awkward block: it drops into a corner a rectangle can't use, the curved wall reads softer against planting, and the bench turns the edge into a seat. Aqua Technics certifies these as the only design-certified round fibreglass pools in the country, so they pass engineering and council the same as any pool we install — our 4m round pool in Alexandra Hills shows one finished in Silver Mist for a compact family yard.

By shape · Rectangular

Rectangular pools

The rectangle is the workhorse of fibreglass, and for good reason. Clean parallel lines suit modern homes, make paving and fencing straightforward, and use a backyard's space more fully than any other shape — which is why most of our pool range is rectangular, just at different scales.

From the slimline Florentina and Harmony (2.5m wide, for a side yard) through the 6m Empire to the 8m Valentina and 9m Westminster for a family, the proportions shift but the logic holds: a moulded rectangle with radiused corners, a shallow end and a deep end, ready to drop in and swim.

By shape · T-shaped

T-shaped pools

Five of our shells break the rectangle with a moulded T. The crossbar gives a wide, shallower section for lounging, steps and play, while the leg runs out to a deeper end you can swim — one pool that does the entertaining and the exercise without picking a side.

They run from the 6.5m Bellino up through the Imperial, Castello and Grandeur to the 9m Amalfi, which reaches a full 2m at the deep end. Every one comes out of a fixed mould like the rest of the range, so you get the T shape with a factory finish and none of the concrete build time. A true freeform or kidney shape is a concrete-only build — one of the few kinds of swimming pools fibreglass doesn't mould.

By use · Plunge

Plunge pools

A plunge pool is a design choice more than a size band: a compact shell you cool off, sit and soak in rather than swim laps in. It's the answer to a courtyard, a small block, or a spot beside the deck where a full pool would never fit.

The slimline Allure, Sovereign and Portofino (5–5.5m) and the compact Latina and Verona (around 4.5m) are the rectangular plunge pools in our small pool range, and the round Terrace and Infinity pools plunge just as well. We also stock the Bastia — a 3.2m × 2m spa that works as a plunge on its own.

By feature · Spa

Pools with a spa

A spa isn't a separate model — it's a companion built alongside the pool you choose, sharing the same paving, plumbing and equipment. Pick any pool, add a spa as a raised spillover or an in-line unit, and we plumb and wire it during the build so nothing gets retrofitted later.

Our Kensington and spa project in Booval is the combo in the flesh — an 11m family pool with a spillover spa cascading into it, quoted as one job. For a standalone spa, we stock the Bastia: a compact 3.2m × 2m unit that also serves as a plunge pool on a small block.

By feature · Edge

Infinity & drop-edge pools

An infinity pool or drop-edge look isn't a pool model — it's what you do with the wall on the downhill side of a sloping block. The pool sits at the high point, and the exposed face drops away as a clean, raised edge, finished with a strip or fully clad. Any of our shells can be set up this way where the ground falls.

The trick is that the exposed face is an engineered drop-edge retaining wall, so it's designed and priced with the pool once we have your levels — not guessed at afterwards. It's the single best answer to a backyard that slopes away from the house.

By feature · Wade-in

Wide-step entry, benches & wading

The nicest way into a pool is to walk down into it, the way you would into a natural swimming hole. Several of our shells are moulded with full-width entry steps — the Hayman, Bedarra and Terazza graduate down across the whole shallow end, so you wade in rather than climb down a ladder.

For sitting rather than walking in, the round Infinity pools carry a bench seat around the rim, and the shallowest sloped shells like the Serenity start around 1.1m — low enough for toddlers while adults stand. A true splash deck or submerged sun ledge is built into the pool landscaping around the shell, designed and priced with the pool.

By depth

Deep vs shallow: choosing on depth

Depth decides how a pool feels to use. A deeper pool suits diving, cooler water on a hot day and adult swimming; a shallower one is safer and warmer for kids and easier to heat. Most of our shells slope from a shallow end to a deep end, so you get both in one pool.

These are the real moulded depths from our specifications — deepest models first. The Amalfi and Kensington both reach a full 2m, while the round Infinity pools hold a level 1.45m end to end.

ModelLengthShallow endDeep end
Saint Louis9.50m1.32m2.0m
Kensington11.0m1.0m2.0m
Amalfi9.0m0.90m2.0m
Sheffield8.0m0.98m1.96m
Saint Azur11.48m1.37m1.96m
Saint Remy7.60m1.32m1.96m
Serenity4.0m1.10m1.47m
Infinity 33.0m1.45muniform1.45m
Infinity 44.0m1.45muniform1.45m
Terrace 33.0m1.45muniform1.45m
Bastia3.20m1.0muniform1.0m
Elba4.0m1.0muniform1.0m

Depths are the moulded shell dimensions from our specifications. Uniform-depth pools hold one depth end to end; the rest slope from a shallow end to a deep end.

By size

Browse by size

Footprint is where most people start, because it's set by the block. We group the range into five size bands — from the 3m rounds to full lap shells — and each links to the models that fit, with a genuine starting price.

By colour

Browse by colour

Colour changes a pool more than any brochure suggests. Every shell is finished in one of four Crystalite® ColourGuard gelcoats — lighter tones make the water look bigger and brighter, darker ones give a glassy, reflective surface. Choose a finish to see it under real Brisbane light.

Fibreglass pool design questions, answered

What shapes do fibreglass pools come in?

Fibreglass pools are moulded shells, so the shape is set at the factory. Our range covers three: rectangles with softened, radiused corners (the bulk of the models, from 5m to 11m), a round range (the Terrace 3, Infinity 3 and Infinity 4), and five T-shaped pools (the Bellino, Imperial, Castello, Grandeur and Amalfi). A true freeform or kidney shape is a concrete build, not fibreglass.

Do you make round fibreglass pools?

Yes — three of them. The Terrace 3 is a 3m round plunge with a flat, uniform 1.45m floor. The Infinity 3 (3m) and Infinity 4 (4m) are round plunges with a bench seat set into the rim to sit and wade on. Aqua Technics builds these as Australia's only design-certified round fibreglass shells, so they clear engineering and certification the same way our rectangular pools do.

Do you make T-shaped fibreglass pools?

Yes. The Imperial (7m) and Amalfi (9m) are moulded T-shaped shells — the crossbar gives a wider section for lounging and play alongside a deeper swimming leg. They're the two T-shapes in the range; every other model is a rectangle or a round pool.

Can I add a spa to a fibreglass pool?

Yes — a spa sits alongside any of our pools as a raised or in-line combo, plumbed and wired during the build rather than bolted on later. Our Kensington and spa project in Booval pairs an 11m family pool with a spillover spa, quoted as one figure. We also stock the Bastia, a compact 3.2m × 2m spa that doubles as a plunge pool on its own. Book a site visit and we'll price the combination that fits your block.

Which fibreglass pool is best for swimming laps?

The longer, narrower shells swim best. The Bellagio (7.5m × 2.5m) is the one true narrow corridor for a tight side yard; step up to the Sheffield (8m), Elysian (8.3m) or Kensington (11m) for a full lane with a deep end. Fibreglass doesn't do a 25m lap pool — those are the models that give the most unbroken length.

How deep do your fibreglass pools go?

The deepest shells reach 2.0m at the deep end — the Amalfi and Kensington both hit a full 2m, deep enough for diving, with the Sheffield close behind at 1.96m. At the other end, the round pools hold a level 1.45m and the compact plunges sit around 1.1m to 1.5m, which suits wading, kids and cooling off. Every model's shallow and deep figures are in the depth table above.

Found a design that fits your yard?

Book a free site visit — we'll measure your block, confirm which shapes and sizes fit, and quote the pool, surround and any spa as one all-inclusive figure.

Call 1300 30 60 11

Mon-Fri 8am-5pm, Sat 9am-1pm